Repairs | 6 min read
How to Replace a Wing Bladder: Step-by-Step
2026-10-22 - words by Foilsummit Crew

- Time
- 30-60 min
- Difficulty
- Medium
- Key
- Talc + slow inflate
- Risk
- Pinching the bladder
Short answer: deflate fully, open the zip, disconnect the valve, pull the old bladder out, talc the new one, feed it in from the valve end and inflate slowly. Don't force it.
Most wing bladder changes are straightforward if you work slowly. The two ways people ruin a new bladder are pinching it in the zip and inflating it before it's seated.
Tools
- Replacement bladder and valve.
- Talcum powder or bladder lube.
- Pump, soapy water, clean cloth.
- A blunt tool (not a screwdriver) to help seat the valve.
Steps
- Deflate completely and open the bladder zip.
- Disconnect the valve and pull the old bladder out slowly.
- Check the wing for sharp objects or debris.
- Talc the new bladder and feed it in from the valve end.
- Seat the valve, close the zip without trapping the bladder.
- Inflate slowly, check for twists, then leak-test with soapy water.
When to get help
If the valve housing is damaged or the bladder won't seat, stop. Forcing it can tear the wing or the valve. Our repair service can handle it.
Common questions
Can I repair a bladder instead of replacing it?+
Small pinholes can be patched, but a replacement bladder is more reliable and usually cheap. If the leak is at the valve, replace the valve too.
Why does my new bladder twist?+
It wasn't fed in straight or was inflated before seating. Deflate, straighten it and try again with more talc.
Filed from the beach — Foilsummit Journal

