Free shipping on most orders over $100

Foilsummit
All stories

Repairs | 6 min read

How to Fix Foil Corrosion (and Stop It Coming Back)

2026-10-21 - words by Foilsummit Crew

How to Fix Foil Corrosion (and Stop It Coming Back)
Time
30-45 min
Difficulty
Easy-medium
Key
Dry + anti-seize
Risk
Seized bolts
Short answer: disassemble, rinse, clean the corrosion with a fine pad, dry fully, apply a protective coating and reassemble with anti-seize. Then rinse after every session.

Aluminium foils corrode when salt water sits between dissimilar metals. The white powder is aluminium oxide; the seized bolt is galvanic corrosion. Catch it early and the foil lasts years.

Tools

  • Fresh water, soft brush, fine Scotch-Brite.
  • Aluminium protectant or a thin marine grease.
  • Anti-seize for stainless bolts.
  • Torx keys that fit properly.

Steps

  1. Disassemble the foil and rinse every part with fresh water.
  2. Clean corrosion with a fine pad - don't gouge the metal.
  3. Dry completely, including the mast-fuselage joint.
  4. Apply a thin protective coating to bare aluminium.
  5. Reassemble with anti-seize on the bolts.
  6. Rinse and dry after every salt-water session.

When to replace

If the corrosion has pitted deep into a structural area or a bolt is seized, stop. Drilling out a mast or fuselage is a job for a shop. Our repair team can assess it.

Common questions

Why do my bolts seize?+

Stainless bolts in aluminium corrode galvanically when salt water stays in the joint. Anti-seize and rinsing prevent it.

Can I use WD-40?+

It can help free a bolt, but it isn't a long-term protectant. Clean it off and use a proper marine grease or anti-seize.

Filed from the beach — Foilsummit Journal

Ready to ride?

Explore the gear behind this guide — at outlet prices.

Book a repair