Free shipping on most orders over $100

Foilsummit
All stories

Repairs | 6 min read

How to Repair a Board Ding: A Simple Ding Repair Guide

2026-10-20 - words by Foilsummit Crew

How to Repair a Board Ding: A Simple Ding Repair Guide
Time
1-2 hours + cure
Difficulty
Easy
Key
Dry + seal
Risk
Trapping water
Short answer: dry the ding completely, sand the edges, clean with alcohol, fill with the right resin or epoxy putty, cure, sand flush and finish. If the core is wet or the damage is structural, get it repaired professionally.

A small ding is a maintenance job. Water in the core is a much bigger problem, so the priority is sealing it properly - not making it look perfect.

Tools

  • Ding repair kit or epoxy putty.
  • Sandpaper (80/120/240), alcohol, tape.
  • Mixing cups, gloves, a clean stick.

Steps

  1. Dry the board and the ding completely.
  2. Sand around the damage to clean, sound material.
  3. Clean with alcohol and let it dry.
  4. Tape around the area and fill with resin or putty.
  5. Cure fully, then sand flush.
  6. Finish and check for pinholes.

When to stop

If the core is wet, the damage is under a footstrap or the board is soft, don't fill over it. Our repair service can dry and repair it properly.

Common questions

Can I repair a wet ding?+

No. Trapped water causes further damage. Dry the board and the core before sealing, or have a shop do it.

Epoxy or polyester resin?+

Match the board's construction. Most foil boards use epoxy; polyester can melt EPS cores. If you're unsure, use epoxy.

Filed from the beach — Foilsummit Journal

Ready to ride?

Explore the gear behind this guide — at outlet prices.

Book a repair