Buying Guides | 9 min read
Duotone Foil Compatibility: 3BS, Masts and Tails (2026)
2026-11-19 - words by Foilsummit Crew

- Connection
- 3BS / 3BS+
- Mast SLS 2.0
- 76/84/92cm
- Quickmount
- 76/84cm
- Tail H
- Downwind/parawing
- Tail F
- Freestyle/kite
- Rule
- Check exact part
Duotone foil compatibility is easier to understand when you stop thinking in model names and start thinking in connections. The front wing, mast, fuselage or frontpiece, and tail each have their own interface. A part can carry the same SLS or D/LAB label and still not connect to another part.
The four parts
- Front wing: the lift surface and the front connection.
- Mast: the length and the mast-to-fuselage insert.
- Frontpiece or fuselage: the centre section that connects the mast, front wing and tail.
- Tail or stabiliser: the rear wing and its connection.
What 3BS and 3BS+ mean
3BS is Duotone's three-bolt mast-to-fuselage connection direction. The 2027 performance products introduce or support 3BS+, which adds a fourth fixing point where the compatible components are designed to use it. A supported direction does not mean every historical component, size or hardware kit is interchangeable. Count the bolts, check the inserts and confirm the exact parts.
2027 compatibility overview
- Crest SLS: SLS front-wing mount and current AL 3BS fuselages; S, PX and H stabilisers; Monobloc via the new frontpiece. Use the Frontpiece AL 3BS for a Monobloc tail.
- Glide 3.0 SLS: current Duotone mast and stabiliser direction; current stabilisers; Monobloc via the new frontpiece.
- Glide 3.0 D/LAB: D/LAB front-wing and tail direction; D/LAB tails, H/S/PX stabilisers and new Monobloc tails. Confirm the selected tail and connection hardware.
- Pop D/LAB: 3BS+ fourth-screw system developed around the Monobloc Tail F165. Use the complete 3BS+ configuration.
Masts
The Mast SLS 2.0 is a one-piece carbon mast in 76, 84 and 92cm. The Mast SLS 2.0 Quickmount comes in 76 and 84cm with a detachable alloy baseplate for storage and travel. Both new mast directions use the 3BS+ insert, but you still need to verify the frontpiece, fuselage and tail.
Tails
- Monobloc Tail H D/LAB: the pump-and-glide direction. H130 uses a 43cm tail and H150 a 40cm tail; aimed at downwind, parawing and freefly efficiency.
- Monobloc Tail F D/LAB: the F165 freestyle and kite option.
- Conventional stabilisers: S, PX and H, depending on the front wing and fuselage.
Compatibility checklist
- Record the exact name, year, size and item number of your front wing.
- Identify whether your centre section is a full fuselage or a separate frontpiece and tail.
- Confirm the mast insert and fastening hardware.
- Confirm the tail connection and whether a Monobloc frontpiece is required.
- Ask before buying if you are mixing generations or construction families.
This guide is a buying aid, not a guarantee. Hardware, inserts and package contents can vary. Send us a list or photos of every part and we will confirm the exact setup before you order.
Browse Duotone foil gear, compare Duotone Skybrid vs Crush or Duotone Unit SLS vs D/LAB, or read how to choose your first foil setup.
Common questions
What is Duotone 3BS?+
It is Duotone's three-bolt mast-to-fuselage connection direction. The front wing, mast, fuselage and tail still need to match individually.
What is 3BS+?+
3BS+ adds a fourth fixing point on compatible 2027 components. It does not make every older part interchangeable; check the exact frontpiece, mast insert and tail.
Can I mix Duotone SLS and D/LAB parts?+
Not automatically. SLS and D/LAB labels do not prove compatibility. Some parts share a connection direction, but the front wing, mast, fuselage and tail must be checked as a system.
Which Duotone mast should I buy?+
The Mast SLS 2.0 comes in 76, 84 and 92cm. The Quickmount comes in 76 and 84cm with a detachable baseplate. Choose the length for your level and conditions, then confirm the insert and frontpiece.
What is the Monobloc Tail H?+
A high-aspect tail for pump-and-glide, downwind, parawing and freefly efficiency. H130 uses a 43cm tail and H150 a 40cm tail.
What is the Monobloc Tail F?+
The F165 freestyle and kite tail, used with the Pop D/LAB and the 3BS+ configuration.
How do I check Duotone foil compatibility?+
Write down the exact name, year, size and item number of every part: front wing, mast, frontpiece/fuselage and tail. Send us the list or photos and we will confirm the connections before you order.
Filed from the beach — Foilsummit Journal






